water ionizer performance

Water Ionizer Performance

What you need to know about water ionizers performance…

water ionizer performance is NOT absolute. It depends on three important variables: water quality, the power applied at each setting and water flow rate. In addition to these three variables, performance year-in and year-out is important and depends on how well a water ionizer’s electrode cleaning system works to keep the electrodes and membranes clean. Beware of any company or sales person who tells you “our water ionizer will do “X”. It is simply not true. What is true is that when you understand the variables, and water ionizer cleaning systems, you can make an informed choice. Learn how our AutoAdjust technology helps overcome the three variables and why DARC II cleaning keeps water ionization performance optimal over time. Be smart.

Truth: over the years, the alkaline water ionizer industry has run rife with undocumented water ionization performance claims around pH and ORP and now molecular hydrogen (H2).

Truth: many people who sell alkaline water ionizers state performance absolutes, as in our water ionizer will do “X”.

Truth: you can cut through all this. Below are four things you need to know about water ionizer’s performance metrics in ANY electric water ionizer.

Your Source Water Matters.

This first point cannot be emphasized enough. water ionization performance levels are significantly impacted by source water – whether you are talking about H2, pH and/or ORP. Any water ionizer running on hard water, or water with elevated levels of minerals or high Total Dissolved Solids (TDS), will always perform better. The harder or more mineralized the water, the better the top-end water ionization performance. Conversely, the exact same water ionizer on soft water with low mineral content will always perform lower than it can in hard water.

Comparisons are only legitimate if done using the exact same source water. Beware of importers in hard water areas who over-state performance. For example, Life Ionizers™ is located in Carlsbad, California. They have extreme TDS – over 600ppm1. To contrast, our TDS in Reno is 10% of that at between 60 – 70 ppm. Any credible water ionizer company will state a range of water ionization performance. Not absolutes.

Your water Ionizer’s Flow Rate Matters.

The second important point is that a water ionizer’s flow rate will affect water ionization performance. All things being equal, slower water flow rate will produce more water ionization performance as water will stay longer in contact with the electrodes. Some manufacturers intentionally produce water ionizers with slower flow rates to compensate for less efficient electrodes. Slowing the flow will also typically raise pH, and high pH water doesn’t taste good to most people. The vast majority of alkaline ionized water drinkers settle on lower pH ranges for regular drinking.

Electrode Power Matters.

water Ionizers offer selectable alkaline levels – typically four – that you choose with a push of a button. Each time you choose a higher level, more power is sent to the electrodes and incrementally more water ionization performance is achieved. water Ionizers that advertise high power (some go as high as 800 watts!) are ironically only advertising that they have inefficient electrodes and membrane systems. An incredibly important and often overlooked point is that water ionizers that utilize higher power will experience higher electrode heat. When electrodes get hot, the platinum plating deteriorates. Compromised plating delivers less water ionization performance over time. Many water ionizers tout higher power as the solution to water ionization performance. In the long run, it isn’t.

AutoAdjust in AlkaViva water ionizers detects the hardness of filtered water and dynamically adjusts/sets power applied on electrodes to what is required.

Electrode Cleaning is King.

The effectiveness of a water ionizer’s electrode cleaning system affects water ionization performance over time. This is also an overlooked point. You can have the perfectly mineralized water, the greatest electrodes, proper water flow rate and power, but if your water ionizer can’t eliminate scale, its water ionization performance will drop. Quickly, if you have very hard water. We have tested scaled up water ionizers that do not produce any alteration in the water. To achieve optimal water ionization performance the electrodes must be kept clean – over time. How effectively an water ionizer’s electrode cleaning system works is critical. Don’t be misled by gimmicky marketing names for electrode cleaning systems – it all boils down to the acid to alkaline cleaning ratio. When shopping, ask what the cleaning ratio is and how the system achieves that. If you do not get a lucid answer, run. Fast.

The Ultimate Solution.

While we can’t control source water, we do offer you the most advanced and effective solutions to all the other variables.

Convenience. You want a water flow rate that is fast enough, but not too fast. Super-fast flow rates will not only lower water ionization performance but they will significantly compromise water filtration. Water filters work on contact time. The faster water flow, the less contact time, especially in GAC and vitamin C water filters. The AlkaViva  H2 water ionizer Series runs at 3 lpm which is the ideal balance between great water ionization performance and great water  filtration.

Superior water Filtration. USA made UltraWater filters are the only water ionizer filters that have been independently tested against 172 contaminants and shown to reduce virtually all of them to 99.9%. Even the toughest. There is no better water filter available – because AlkaViva believes that healthy water should start by being clean.

molecular hydrogen H2 Infusion Technology. We employ the highly advanced Smart Electrode design and manufacturing. Next, we match the Smart Electrodes with our own proprietary membrane technology that is optimized to produce optimal molecular hydrogen H2 and ORP -water ionization performance.

Superior electrode cleaning means lasting water ionization & durable performance. AlkaViva H2 Series water ionizers employ our newly improved DARC II Cleaning System which previously (as DARC) was for 9 years the best cleaning system in the industry. DARC II offers the most effective 1:1 cleaning ratio using a constantly reversing polarity system controlled by a non-scaling ceramic valve.

Efficiency. AlkaViva H2 water ionizers employs the most sophisticated and advanced power delivery system. The correct current density ensures the longest electrode life and is only possible using more advanced (smaller sized) plates. You get power  efficiency and water ionization performance. While other less advanced water ionizers are required to use maxed out power of up to 800 watts to achieve water ionization performance, AlkaViva H2 water ionizers run 150 watts of peak power ensuring fantastic power density, unmatched water ionization performance and long durable  plate/electrode life. Our power supply also includes Auto Adjust which automatically adjust the background power using pulse width modification technology – optimizing water ionization performance. You get great water ionization/alteration – even at the better tasting and lower pH levels that most people drink.

Independent testing. AlkaViva is the only water ionizer company to have commissioned an EPA-certified, third party, independent laboratory to document the water performance results of different brands and prove our point about efficiency and performance. Bigger just isn’t better. When it comes to technology – including water ionizers – smaller is.

Note on molecular hydrogen H2 Performance: while we understand the basic science of how molecular H2 is produced during electrolysis, it is a new focus in our industry. No one fully understands all the unique nuances of this delicate electro-chemical process. We don’t fully know how certain properties, in addition to hardness and TDS, affect molecular  H2 performance. Apart from TDS and hardness, it is entirely possible that certain water chemistries lend to better performance, and others to less.

That is a lot of information. However, we feel these are all important points for properly informed customers to consider before simply reading – and believing – a company’s declaration that “our water ionizer does X”.

To get optimal benefits, we offer AlkaViva’s DARC II electrode cleaning and our Smart Electrodes that are perfectly powered for maximum efficiency and water ionization performance that lasts. Exactly what you want.

1) http://www.carlsbadca.gov/civicax/filebank/blobdload.aspx?BlobID=25132

Comment !